info@boonebv.nl +31 (0)186 - 61 83 00
NL

Projects

Boone carries out many projects every year. For every project, we look for the best technical solution with minimal delay for the customer. The projects below show a selection of the solutions that Boone can offer. We are happy to help you with your project!

Boone_Marine_Fregat_Schelde_OpenKast

Marine frigate - Schelde Gears

On board this naval frigate there are 2 Schelde Gears propulsion gearboxes. These gearboxes are equipped with V-gearing...

View project
Boone_keerkoppeling_Rhenania_axiaal-afstelling

Damage Rhenania gearbox

Aboard a sea/river-going coaster a damage occured in the reverse reduction gearbox after 25 years of use.

View project
Boone_Jaure_Etron_tandkoppeling

Gear couplings from stock

During the weekend a customer contacted Boone because he had a breakdown of a gear coupling. As a result, the installati...

View project
Boone_Reintjes_tandwielkast2

Reintjes LAF 7760 DL

On board a hopper dredger, the hydraulic clutch of the Reintjes propulsion gearbox type LAF 7760 DL malfunctioned.

View project
Boone_Flender_tandwielkast2

Flender GSP1 320 dredge pump gearbox

On board an IHC cutter suction dredger type Beaver 1200 a Flender dredge pump gearbox type GSP1 320 with integrated thru...

View project
Boone_dichte_tandwielkast

Overhaul Rhenania AWNS 50/56 So

Boone has revised the Rhenania reverse reduction gearbox type AWNS 50/56 So of a fishing vessel. This gear unit has been...

View project
Boone_bestaande_situatie

Overhaul Rhenana ANs 45

For an existing hopper dredger Boone has revised the starboard propulsion gearbox. P = 1 x 1000 kW at 1000 rpm.

View project
Boone_hijsen_tandwielkast

Keller submerged dredge pump gearbox

On board of a cutter dredger a damage occured on the submerged dredge pump gearbox, due to the incorrect direction of ro...

View project
Boone_koppeling

Rhenania ALN 71 propulsion units

Boone has overhauled both the port and starboard propulsion gearboxes for an existing hopper dredger. P= 1 x 1838 k...

View project
Boone_tandwielkast-op-schip

Jahnel Kestermann cutterdrive gearbox E560-1120

This Jahnel Kestermann cutterdrive gearbox was inspected in Sri Lanka by one of our Boone service engineers. Given the d...

View project
Boone_Tandwielkast

Lohmann & Stolterfoht GWC66.75

On board MV Amavisti, a torn elastic coupling was found on the Chongqing propulsion gearbox, type GWC 66.75., licensed b...

View project
Diesel-Generatorset

Crane pontoon couplings

For a re-engine project of a floating crane pontoon, Boone has supplied the elastic couplings. Rated torque: 5,000 Nm...

View project
Genflex

Highly elastic couplings GenFlex generator sets

Boone has supplied highly elastic flexible couplings for GenFlex generator sets.

View project
Boone_Jahnel_Kesterman_Overview

DEME - Jahnel Kestermann

Boone has overhauled both Jahnel Kestermann propulsion gearboxes for an existing hopper dredger.

View project
Boone_Lohmann_Stolterfoht_GebrokenAs

Hartmann - L&S GWC 52.09

On board MS MCP Hamburg, a broken pinion shaft was found on the Lohmann & Stolterfoht propulsion gearbox type GWC 52.09.

View project
Boone_Rhenania_Tandwielkast2

Boone ALNp 50 Z-P

Boone has supplied a new dredge pump gearbox for an existing hopper dredger: Boone type ALNp 50 Z-P

View project
Boone_Masson_Voortstuwing_Keerkoppeling_Machinekamer_2

Masson clutch coupling RSD701

The Royal Netherlands Navy recently asked Boone to take a look at a long-term problem with the propulsion system of one...

View project
Boone-brugaandrijving-Schinkelbrug-1

Schinkel-, Vechtbrug, Zijkanaal C

Boone supplied the complete drive system for these three bridges. In addition to the gearboxes, couplings and brakes, th...

View project
Boone-aandrijving-sluis-Linne-2

Locks Linne

In addition to supplying the components, Boone also carried out the work at these locks.

View project
Boone_Verdelerkast_VanOord

Van Oord - Boone gearbox

A problem was found on board a cutter suction dredger with the hydraulic pump drive, type Boone 4A 40 So.

View project
Boone_Rhenania_Tandwielkast_Nieuw

Modification Rhenania AWN 56 So

For a modification of an existing hopper dredger, our customer immediately needed a hydraulically switchable gearbox. Th...

View project
Boone_InergoInvest_Tandwielkast

Reduction gearbox BAP 500H

Our customer had discovered a problem with one of the propulsion gearboxes on board the hopper dredger. Boone was contac...

View project
Boone_Rossi_GeopendeTandwielkast

Rossi gearbox R3L561

From one moment to the next, the handling of containers at this crane was over. The gearbox was completely blocked and t...

View project
Foto1

Wheel scraper rail crane

Wheel contacts are frequently used on rail cranes to properly dissipate static electricity. Especially when it comes to...

View project
PHOTO-2019-05-17-09-09-41

Rolls Royce Aquamaster

Two propulsion thrusters of the AQM US 601 type are mounted on board a coaster. Due to the number of operating hours, th...

View project
Tandwielkast open

Kumera gearboxes LD 3400 R+L

After 27 years of service, it was time to overhaul these Kumera gearboxes type LD 3400 R + L.

View project
Voorsluis deuren

Drives lock Eefde

For Hollandia, Boone overhauled the drives for the lock in Eefde and replaced the bearing foundation.

View project
Nieuwe_encoder_aansluiting

Bascule bridges N57 Stellendam

Boone replaced brakes, engines and encoders of both bascule bridges for Vialis.

View project
Rem_foto_totale_opstelling

Brakes Algera lock

For Volker Rail, Boone replaced the brakes on the drives of the lock doors at the Algera Lock.

View project
IMG_5747

Jet pump drive

Boone overhauled the starboard jet pump gearbox for an existing water injection vessel. Product: Kumera Norgear Type...

View project
IMG_3551

ZPMC hoist gearbox

Due to damage to a roller bearing of a pinion shaft, the teeth of this shaft are damaged. Type FH1655.21C5A.00

View project
Boone_tandwielkast_thruster_1

Rolls Royce thruster

Work was carried out on the propulsion of thusters type AQM 205 FP for a tugboat.

View project
Boone_schakelbare_koppeling_1

Allseas couplings

For a dive support vessel, Boone has supplied two new hydraulic clutch couplings to replace the old pneumatic clutch cou...

View project
Boone_Pneumaflex_1

Repair of Pneumaflex coupling

After this clutch slipped during operation, it no longer functioned properly. Boone disassembled and inspected the coupl...

View project
Boone-Thruster- 3

Overhaul Rolls Royce thruster

Due to the expertise of Boone in the field of thruster repair and overhaul, a relationship requested assistance from one...

View project
Schade-voor-overzichtsblad-

Stromag elastische coupling

A problem was found on board a tugboat with the bearing of the elastic coupling with Periflex element and cardan shaft c...

View project
Kijk-door-de-lagering

Cutter suction dredger bearings

For a new cutter suction dredger CSD 850 our customer required a drive shaft. Boone was requested to deliver several com...

View project
Boone_tandwielkast_5

Conveyor belt drive

For a conveyor belt drive in the port of Rotterdam, we were asked to overhaul the gearbox and solve the leakage

View project
Boone_brugaandrijving_5

Renovation of the Zuid-Willemsvaart bridge

Boone has been commissioned to dismantle the entire drive of this bridge, overhaul it in the workshop and rebuild it in...

View project
Boone_SMBL_400_rem

Sibre industrial brakes

For our customer a brake has been designed that fits in the available space in the overhead crane.

View project
Boone_Schiphol_Sneeuwschuiver_1

Schiphol - Kumera

For customer Schiphol, Boone carried out a repair of a Kumera gearbox type NKHU 7.500 of a snowplow.

View project
Gearbox_Boone_Kumera_tekening-tandwielkast

Kumera FiFi gearbox

A problem was discovered on board a tugboat with the hydraulic plate clutch of the Kumera gearbox type NKHU 15000. The c...

View project
Boone_Rem_Revisie_4

Heerema - Sibre brakes

We received an order from our customer Heerema to overhaul the brakes that had been on one of the work ships for years.

View project
Boone_kabelschijven_vervanging_3

Gosan sheaves

During the annual inspection of the 12t auxiliary crane, a number of cable sheaves appeared to contain little cracks. Du...

View project
Boone_Rhenania_AWLG_50-45_detail

Overhaul Rhenania AWLG 50/45

Boone has completely overhauled 2 Rhenania propulsion gearboxes type AWLG 50/45. P= 1 x 850 kW at 600 rpm i = 2.5...

View project
Boone_Rem_1

Bridges Rozenburgsesluis

Boone replaced the brakes including the foundation of both bascule bridges for the Port of Rotterdam Authority.

View project
PTO shaft

RENK gearbox type HSN 985

During the start of a fishing trip, a noise was heard from the gearbox. To avoid further problems, it was decided to ret...

View project
Boone_Lohmann_Stolterfoht_cutterkast_kast-2

Lohmann & Stolterfoht cutter gearbox

This cutter gearbox type GJZ 1090/1265 was inspected in the Caribbean by one of our technicians.

View project
Boone_oude_koppeling

Gear coupling MTV 100

Boone adapted a standard coupling for this shipping company so that the ship was operational again within a week.

View project
Boone_gereviseerde-tandwielkast

JaKe generator gearbox

Boone has overhauled one of the generator gearboxes for an existing cutter suction dredger.

View project
Boone_tandwielkast_voortstuwing_4

Boone gearboxes

Boone supplied these newly built gearboxes as replacements for the existing installation which was not working properly.

View project
Boone-tandwielkast

JaKe cutterhead gearbox

Boone has overhauled the Jahnel Kestermann cutterhead gearbox type E 500/1000 for an existing cutter suction dredger.

View project
Boone_gearbox-opened

Jahnel Kestermann cutterhead gearbox

Boone has overhauled the gearboxes for an existing cutter suction dredger.

View project
Boone_Beaver-600_tandwielkast_nieuw

Flender GSP1 250 dredgepump gearbox

On board the IHC cutter dredger Beaver 600 a Flender dredgepump gearbox GSP1 250 with integrated thrust bearing is insta...

View project
Boone_bowthruster_ship

Rolls Royce bow thruster

Due to water in the oil of this bow thruster unit type TV 150, Boone was called in for an inspection.

View project
Kumera_tandwielkast_generatoraandrijving_1

Kumera Norgear 2FG-2400

During a regular inspection on board, a roller bearing on the input shaft appears to show serious wear.

View project
Boone_Schip

Hybrid drive

On board a fishing vessel, Boone contributed to the realization of one of the first hybrid propulsions.

View project
Boone_schakelbare_tandwielkast_2

Boone dredge pump drive

Boone has supplied a dredge pump drive for a dredging company as a replacement for the existing installation.

View project
Boone_tandwielkast_containerkraan_3

Hoist gearbox PIV

This gearbox type PIV PD75-R11-V25 is regularly checked by means of an oil analysis. During this check it was noticed th...

View project
Boone_ASUG_Keller_Tandwielkast

ASUG gearbox overhaul

During an inspection on board this trailing suction hopper dredger a broken tooth of the propulsion gearbox was detected...

View project
Boone_Rhenania_Voortstuwing_Tandwielkast_Schip

Rhenania gearboxes DEME

On board the trailing suction hopper dredger PACIFIQUE, Rhenania gearboxes provide the propulsion and dredging pump dri...

View project

Ready to get started?

Our professionals have the knowledge and equipment to get the job done!

Contact us
DSC_0048